Hem Options
Displays the Hem Options dialog box.
Select Edges Step
Specifies the edges used to create the hem.
Cancel/Finish
This button changes function as you move through the feature construction process. The Finish button constructs the feature. After finishing the feature, you can edit it by re-selecting the appropriate step on the command bar. The Cancel button discards all input and exits the command.
Material Inside
Positions the hem on the inside of the profile plane. Overall part length remains the same.
Material Outside
Positions the hem on the outside of the profile plane. Overall part length increases by the material thickness.
Bend Outside
Positions the hem and the bend on the outside of the profile plane. Overall part length increases by the material thickness plus the bend radius.
Select
Sets the method of selecting a hem element.
Single—Selects one or more individual elements.
Chain—Selects a endpoint connected set of elements by selecting one of the elements in the chain.
Deselect (x)
Clears the selection.
Accept (check mark)
Accepts the selection.
Other command bar Options
Name
Displays the feature name. Feature names are assigned automatically. You can edit the name by typing a new name in the box on the command bar or by selecting the feature and using the Rename command on the shortcut menu.