Specifies the tolerance type for the hole size. The possible values are: Nominal, Tolerance, Class, and Limit.

Specifies the upper tolerance value for the hole size. This option is not available if the Hole Size Tolerance Type is set to Nominal.

Specifies the lower tolerance value for the hole size. This option is not available if the Hole Size Tolerance Type is set to Nominal.

Specifies the tolerance type for the hole location. The possible values are: Nominal, Tolerance, Class, and Limit.

Defines the options for the hole location.

X

Displays the x location for the selected hole.

Y

Displays the y location for the selected hole.

Radial

Displays the distance from the intersection of the x and y origin pair to the hole measured in a straight line from the intersection.

Angular

Displays the angle from the intersection of the x and y origin pair to the hole measured in a counter clockwise direction from the origin.

Defines the options for the hole.

X Location Upper Tolerance

Specifies the upper tolerance value for the x location. This option is not available if the Hole Size Tolerance Type is set to Nominal.

X Location Lower Tolerance

Specifies the lower tolerance value for the x location. This option is not available if the Hole Size Tolerance Type is set to Nominal.

Y Location Upper Tolerance

Specifies the upper tolerance value for the y location. This option is not available if the Hole Size Tolerance Type is set to Nominal.

Y Location Lower Tolerance

Specifies the lower tolerance value for the y location. This option is not available if the Hole Size Tolerance Type is set to Nominal.

Radial Location Upper Tolerance

Specifies the upper tolerance value for the radial location.

Radial Location Lower Tolerance

Specifies the lower tolerance value for the radial location.

Angular Location Upper Tolerance

Specifies the lower tolerance value for the angular location.

Angular Location Lower Tolerance

Specifies the lower tolerance value for the angular location.