Face Normal Cut Types
Switches between normal cut types.
Thickness Cut
Creates a cutout that compensates for the material thickness of the part.
Mid–Plane Cut
Creates a cutout based on the mid-plane of the part.
Nearest Face Cut
Creates a cutout based on the nearest face of the part.
Extents
Specifies the extent type for the cut.
Finite
Extends the cut a user-defined depth in the part.
Through All
Extends the cut through all the faces encountered on the part.
Through Next
Extends the cut through the next face.
From-To
Extends the cut by specifying a from face and to face.
Symmetric
Creates the cut symmetrically about the region.
Keypoints
Sets the type of keypoint you can select to define a feature extent or to position a new reference plane. You can then define the feature extent or the location of the reference plane using a keypoint on other existing geometry. The available keypoint options are specific to the command and workflow you use.
|
|
Selects any keypoint. |
|
|
Selects an end point. |
|
|
Selects a midpoint. |
|
|
Selects the center point of a circle or arc. |
|
|
Selects a tangency point on an analytic curved face such as a cylinder, sphere, torus, or cone. |
|
|
Selects a silhouette point. |
|
|
Selects an edit point on a curve. |
|
|
Sets the no keypoint option. |
Wrapped Cut
Specifies that the affected bends are flattened during profile edit.
Profile
Specifies profile type.
Open
Specifies an open profile that creates an area by excluding adjacent model edges.
Closed
Specifies a closed profile that creates an area by including adjacent model edges.
Selection Type
Specifies the sketch selection type.
