Specifies information about the fittings you want to place in the pipe.

Pipe Location

Specifies that you want to automatically select and orient fittings based on the selected piping route and the attributes associated with the fittings.

Select from Standard Parts Library

Specifies that you want to select the pipe from the standard parts library.

Browse for Pipes

Specifies that you want to select the pipe from a managed or unmanaged location that is outside the standard parts library.

Select File

Displays a dialog box to browse for the pipe location.

Recently Used

Displays a list of recently used pipe files.

Standard

Specifies the standard to be followed when creating the pipe. This list is based on the list of fittings stored in the standard parts library.

Diameter

Specifies the diameter for the pipe. This list is based on the list of fittings stored in the standard parts library.

Material

Specifies the material for the pipe. This list is based on the list of fittings stored in the standard parts library.

Specifies information about the fittings you want to place in the pipe.

Fittings Location

Specifies that you want to automatically select and orient fittings based on the selected piping route and the attributes associated with the fittings.

Select from Standard Parts Library

Specifies that you want to select the fitting from the standard parts library.

Browse for Pipes

Specifies that you want to select the fitting from a managed or unmanaged location that is outside the standard parts library.

Automatically Place Fittings

Specifies that you want to automatically select and orient fittings based on the selected piping route and the attributes associated with the fittings.

Verify Availability of Fittings

Specifies that you want to search the database based on the specified fitting standard and diameter for each entry in the Pipeclass.txt file. Only entries that contain fittings based on the defined search criteria appear in the fittings class list.

Standard

Specifies the standard to be followed when placing the fitting. This list is based on the list of fittings stored in the standard parts library.

Class

Specifies the class to be followed when placing the fitting. This list is based on the list of fittings stored in the standard parts library.

Threaded Fittings

Specifies that the fitting end conditions will be threaded.

Socket Weld Fittings

Specifies that the fitting end conditions will be socket welded.

Butt Weld Fittings

Specifies that the fitting end conditions will be butt welded.

Flanged Fittings

Specifies that the fitting end conditions will be flanged.

Pipe Penetration Cuts

Specifies that the fitting end conditions will be pipe-to-pipe penetrations cut.

Displays a list of comparison fittings that you will need to place with flanged fittings. This list is based on the list of fittings stored in the standard parts library.

Specifies that you want to display the dialog box every time you start the command.