Bend Options
Displays the Bend Options dialog box so you can set the bend construction options.
Material Side
Positions the bend with respect to the material side.
|
Material Inside |
Positions the portion of the feature that is perpendicular to the profile plane such that it is inside of the profile plane. |
|
Material Outside |
Positions the portion of the feature that is perpendicular to the profile plane such that it is outside of the profile plane. |
|
Bend Outside |
Positions both the portion of the feature that is perpendicular to the profile plane and the bend such that they are outside of the profile plane. |
Measurement Point
Measures from the selected face to the inside or outside of the new feature.
|
Measurement Inside |
Measures from the selected face to the near side of the feature. |
|
Measurement Outside |
Measures from the selected face to the far side of the feature. |
Keypoints
Sets the type of keypoint you can select to define a feature extent or to position a new reference plane. You can then define the feature extent or the location of the reference plane using a keypoint on other existing geometry. The available keypoint options are specific to the command and workflow you use.
|
|
Selects the center and end points. |
|
|
Selects any keypoint. |
|
|
Selects an end point. |
|
|
Selects the center point of a circle or arc. |
|
|
Selects a midpoint. |
|
|
Selects a tangency point on an analytic curved face such as a cylinder, sphere, torus, or cone. |
|
|
Selects a silhouette point. |
|
|
Selects an edit point on a curve. |
|
|
Turns off the keypoint location. |
